Quote:
Originally Posted by Paul Workman
I used metal braded lines following the stock route and then wrapped to the catch can return line to the catch can placed in the well in front of the left front tire.
|
I did very similar 
Post 148 - Elite Engineering Oil Catch Can
Post 242 - Installation of Elite Oil Catch Can
The
PCV hose connected under front of plenum (Vacuum source) is connected using SS braided hose to an
Oil Catch Can external to the engine which
Oil Catch Can is connected using SS braided hose to the dual
PVC valves hard line located at the rear of the plenum.
The Oil Catch Can is located on the drivers side under the drivers side head light.
