ZR-1 Net Registry Forums - View Single Post

richarde · 07-20-2022

One easy check to make is to ensure that the clutch pedal and brake pedal are at the same height when looking at them with the drivers door open. If the clutch pedal is noticeably sitting lower than the brake pedal this could be the problem - you run out of stroke before the clutch disengages.
If both pedals are at the same height, the next check to make is to ensure that the clutch pedal depresses to the floor and does not stop prematurely.
These are 2 easy checks to make before moving onto the next stage.

Sent from my iPad using ZR-1 Net Registry

07-20-2022	#6
richarde Join Date: Sep 2012 Location: United Kingdom Posts: 68	Re: Transmission won?t go into gear One easy check to make is to ensure that the clutch pedal and brake pedal are at the same height when looking at them with the drivers door open. If the clutch pedal is noticeably sitting lower than the brake pedal this could be the problem - you run out of stroke before the clutch disengages. If both pedals are at the same height, the next check to make is to ensure that the clutch pedal depresses to the floor and does not stop prematurely. These are 2 easy checks to make before moving onto the next stage. Sent from my iPad using ZR-1 Net Registry __________________ Richard 1990, numbers 1821 and 2391 1821 - owned since Nov 2002, charcoal / Gray, Stainless headers, B&B system, 4.10's 2391 - owned since Jan 2019, Black / Black, have completed restoration. Jeal headers, Corsa system, 4.10's, Aluminum flywheel with Carolina clutch.