Quick update:
-Replaced the clutch master cylinder and slave cylinder (was leaking bad in bell housing)
-Replaced the coolant reservoir (however I think the heater core might still be leaking)
-Dropped oil pain, cleaned everything up, and put new gasket
Now no leaks at all and car is still running great. It is now giving me issues starting where it is just clicking.. I think it is the switch
it never did this before changing out the master cylinder..
Still left to do:
-Suspension: bushings, tie rod ends, and shocks
-Radio not working (shows the stuck time of 1:00, no sound, and no antenna)
-A/C not working (clutch not coming on)
-Paint needs fixed (clear coat missing on hood and other areas)
-Replace all the weather stripping
Turning into a long project, but hopefully worth it in the end