Re: Antenna Bezel Replacement
Quote:
Originally Posted by moesvette
After having replaced the mast (had to remove antenna motor to remove broken plastic pieces), I decided to try using the standard C4 bezel. It works okay, but it sits a little high compared to the proper bezel. May try milling it down some to get a better fit. All in all, it isn't terrible.
http://www.zr1.net/forum/attachment....1&d=1634563178 |
Looks fine from here--I would just leave it and forget it. As I recall, pulling and installing the antenna is a pain. Unless you are an incredible perfectionist and are afraid an NCRS judge might notice, I would just enjoy your Z!--Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
|