Re: WTB: Clutch & Pressure plate for 1991 ZR-1
Quote:
Originally Posted by A26B
I understand that you are trying to acquire original equipment, DM (dual mass) flywheel & clutch components.
In the event you are not successful in your quest, Jerrys Gaskets can supply used, OE DM Flywheels. While we do not have replacement OE pressure plate & disc, we can supply a RAM conversion Clutch kit to be used with the DM Flywheel. Installation does require a simple modification to the Bellhousing. The RAM Clutch conversion kit eliminates the need for the original (1) Slave Cylinder, (2) Clutch Fork and (3) Clutch Release Bearing.
If you consider replacement of the DM Flywheel, Jerrys Gaskets can furnish any 1 of 4 different SM (single mass) Flywheels for your application with the RAM Single Disc Clutch Kit, all depending on your choice for intended driving style.
You do have options that Jerrys Gaskets can assist you with.
|
As usual, Jerry is the man to see for both parts and great advice. --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
|