ZR-1 Net Registry Forums - View Single Post - Clutch replacement (or can I get it rebuilt?)

jw63 · 05-20-2021

So you have a DMF now? If still in good shape, and lash is still within spec, you could simply reuse or resurface the flywheel and install a new clutch disc. With 85,000 though and original clutch, you?re probably close to end of life on the flywheel.

My 90 came with a single mass flywheel, and it was very noisy even with heavier weight trans fluid. It?s now very quiet with a DMF installed. I would search long and hard before reinstalling a single mass...but some cars I hear it isn?t that noticeable with.

Sent from my iPhone using ZR-1 Net Registry

05-20-2021	#1
jw63 Join Date: Dec 2019 Location: Indianapolis, IN Posts: 45	Re: Clutch replacement (or can I get it rebuilt?) So you have a DMF now? If still in good shape, and lash is still within spec, you could simply reuse or resurface the flywheel and install a new clutch disc. With 85,000 though and original clutch, you?re probably close to end of life on the flywheel. My 90 came with a single mass flywheel, and it was very noisy even with heavier weight trans fluid. It?s now very quiet with a DMF installed. I would search long and hard before reinstalling a single mass...but some cars I hear it isn?t that noticeable with. Sent from my iPhone using ZR-1 Net Registry __________________ '90 #413 Red/Red Sold '90 #1583 Red/Red