Its been a fun few days recently.... had trouble getting the last piston in one of the calipers lastnight...and destroyed a spreader tool in the process....more later on that...
Today I intended to remove the AC evaporator...with the intention to replace if necessary....but I lucked out when I removed the blower fan and could see inside...no major dirt or obstructions to be seen....the camera got a few great views...I just might run a sweeper in there lightly against the fins to remove any real fine particles....this was major to say the least....a big time saver with another ongoing project....
Just need to get some replacement hoses from the heater core....tank etc...while it is apart....today definitely made up for lastnight... plus calipers are resprayed and finished....
Pic #1...tank removed....like everywhere else on the car....a good cleaning is necessary....
Pic #2...glad I checked the evaporator without removing the brace first...lol....that would have been totally unnecessary...
Pic #3...first peak at the evaporator.. was I pleasantly surprised....
Pic #4...put the camera further inside and have a great pic of the evaporator....no major dirt or obstructions....
Pic #5...and surprise....fan is really clean....no major dirt or any debris... but still will be completely cleaned...
Pic #6...part of the frame on the RS...needs and will be repainted.... looks like some type of leak was present at one time or another....
20210430_160728.jpg20210430_162248.jpg20210430_162813.jpg20210430_162847.jpg20210430_162958.jpg20210430_163059.jpg
Sent from my SM-G981U using
ZR-1 Net Registry mobile app