Quote:
Originally Posted by aafc
I have used this system from A/O Engineering ( no longer in business).
Three fans about 5in flows 50 cu ft of air each fan. With 3 fans on each side I
can remove about 150 cu in of air out of the engine bay( each side for a total
of 300 cu in)
I also added a switch so i can turn the fans when ever i want. Works great
when stopped as I can turn the fans on before engine reaches 185 deg to cool motor.
 |
Good post. I had forgotten about the A/O kit from back in the day. Would likely prove useful for built motors on hot days. My 368ci was not happy stuck in traffic idling. Heck it gets too hot just idling with AC on in driveway unless I open the hood.
There are several fans like these available on Amazon various diameter and CFM. IP67 rated should do the trick.