ZR-1 Net Registry Forums - View Single Post - Power steering hose replacements/substitutes

1991 Corvette ZR-1 · 03-02-2021

I know this thread is all over the place, but I?m doing little things while the rack is out at Turn One. I cleaned everything up on the engine oil pan and after a few days of sitting, I had a significant leak coming from the low oil sensor that had coated a good portion of the bottom of the pan in just a few days on the stands. So I ordered a low oil sensor from Zip:

https://www.zip-corvette.com/90-92-o...AaArvkEALw_wcB

I got this and it?s about 3/4 an inch longer than the stock one. I don?t believe it will interfere with anything. Anyone else using one of these? Ecklers has them as well for nearly $70 but they look like the same type.

03-02-2021	#38
1991 Corvette ZR-1 Join Date: Sep 2018 Location: Florida Posts: 305	Low oil sensor I know this thread is all over the place, but I?m doing little things while the rack is out at Turn One. I cleaned everything up on the engine oil pan and after a few days of sitting, I had a significant leak coming from the low oil sensor that had coated a good portion of the bottom of the pan in just a few days on the stands. So I ordered a low oil sensor from Zip: https://www.zip-corvette.com/90-92-o...AaArvkEALw_wcB I got this and it?s about 3/4 an inch longer than the stock one. I don?t believe it will interfere with anything. Anyone else using one of these? Ecklers has them as well for nearly $70 but they look like the same type.