ZR-1 Net Registry Forums - View Single Post

secondchance · 01-25-2021

Issue #2:

If clunking noise is when you go over left to right uneven road (car swaying left to right), I would suspect worn out rear sway bar bushing. I recommend urethane bushing since OEM rubber bushing will fail quite fast.

If clunking noise is from directional change as in forward, stop, reverse, most likely driver side rear bearing hub being torqued to 160 lb-ft. This was revised to 190 lb-ft by Chevrolet.

01-25-2021	#8
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,726	Re: Help with some problems with my 92 Issue #2: If clunking noise is when you go over left to right uneven road (car swaying left to right), I would suspect worn out rear sway bar bushing. I recommend urethane bushing since OEM rubber bushing will fail quite fast. If clunking noise is from directional change as in forward, stop, reverse, most likely driver side rear bearing hub being torqued to 160 lb-ft. This was revised to 190 lb-ft by Chevrolet.