Quote:
Originally Posted by ZR2
I had a 91 and now have a 94. I pulled the plenum on the 91 as the secondary injectors did not work. It was my first plenum pull. I used at the time the Fuel Injector Connection (FIC) injectors. What a quality piece and it changed the life of the car. I recently hjad a coil go bad on my 94, so off with the plenum and basically replaced again all the injectors with FIC injectors and all new GM coils and also new GM replacement wires and plugs. New Jerrys Gaskets etc. It has been going on for awhile and I finally got tired of looking at it in my garage.....Bad Mark........and just finished 2 nights ago. All went good. As long as you take your time no issues.
|
Why did you replace the injectors AGAIN?
If they were stainless steel (alcohol tolerant) I wouldn't think you would ever need to replace them again - at least not until after considerable time/miles, etc.
Course if you opted for the so-called
"rebuilt" (i.e., non alcohol tolerant) injectors the first time, THAT would answer the question as to why you had to replace them AGAIN....