ZR-1 Net Registry Forums - View Single Post

ram_g · 11-01-2020

If you choose to use load resistors, suggest you go with a specific combination of resistor and LED lamp that has been tried by others and shown to work. My initial stab at this was to buy a set of load resistors from Amazon along with the LED headlamps, and they did NOT work. (The high beam of the LED would come on whenever I turned on the foglamps...if you study the wiring diagrams you can see how this might happen, depending on the specific voltage expected by the LED.)

So I went to the Yun relay mod as a fall-back and it worked perfectly.

11-01-2020	#8
ram_g Join Date: Jun 2020 Location: Houston, TX Posts: 183	Re: HEADLIGHT UPGRADE If you choose to use load resistors, suggest you go with a specific combination of resistor and LED lamp that has been tried by others and shown to work. My initial stab at this was to buy a set of load resistors from Amazon along with the LED headlamps, and they did NOT work. (The high beam of the LED would come on whenever I turned on the foglamps...if you study the wiring diagrams you can see how this might happen, depending on the specific voltage expected by the LED.) So I went to the Yun relay mod as a fall-back and it worked perfectly.