ZR-1 Net Registry Forums - View Single Post

flyin ryan · 01-31-2008

on 92's & up you shouldn't need to do anything concerning O-rings with the Accel's, individual pt. no: 150121 or eight pack no: 150821. you might need to use a razor blade to remove the plastic guide for the injector harness clip. it's just a guide, the harness will still clip in place by using the tabs on the sides. the guide was so the primary & secondary were not swapped.

01-31-2008	#3
flyin ryan Join Date: Aug 2006 Location: Edmonton, Alberta or Phoenix, Arizona Posts: 2,736	Re: Accel & Multec Injector ??? on 92's & up you shouldn't need to do anything concerning O-rings with the Accel's, individual pt. no: 150121 or eight pack no: 150821. you might need to use a razor blade to remove the plastic guide for the injector harness clip. it's just a guide, the harness will still clip in place by using the tabs on the sides. the guide was so the primary & secondary were not swapped.