ZR-1 Net Registry Forums - View Single Post

Subfixer · 01-01-2020

I assembled the rails and fuel pressure regulator/fuel transfer tubes first.
I installed the injectors in the rails next, so you can get the clips in.
Then position the rails/injectors over the holes and push them in carefully. Lube the o-rings first.
Be careful not to disturb the fuel transfer tube O-rings.

01-01-2020	#15
Subfixer Join Date: Sep 2018 Location: Groton, CT Posts: 399	Re: Injector Housing Gasket Replacement I assembled the rails and fuel pressure regulator/fuel transfer tubes first. I installed the injectors in the rails next, so you can get the clips in. Then position the rails/injectors over the holes and push them in carefully. Lube the o-rings first. Be careful not to disturb the fuel transfer tube O-rings. __________________ 1992 ZR1 #442, 2 tops, White, White, Haibeck 415, 3.90 gear, Coilovers 2021 Audi RS5, 2.9 V6 Twin Turbo, Auto, Black, Black 2021 Audi Q3, 2.0T, 8 spd Tiptronic, Navarro Blue metallic, Pearl Beige