Quote:
Originally Posted by -=Jeff=-
|
I posted that thread. With the code 42 being intermittent there is a possibility that a DIS pin may not be totally bent but rather misaligned enough to miss going through the center of its respective connector and pass between the connector and the connector housing. The other possibility is a pin connector that has been enlarged, so that the pin goes through it but the electrical connection between them is not good. The OP may want to check the main DIS connector for these issues. I seem to recall someone on the forum had the latter condition with a similar intermittent problem. The code that is generated will depend on which pin is affected.
H
