Re: Installing fuel injectors
Quote:
Originally Posted by Paul Workman
It appears to be a 1990 ZR-1, which has also been ported. (NICE!). Same here!
Injector sources:
FIC can fix you up with the STAINLESS STEEL injectors and the appropriate seals (O-rings and plenum gaskets, etc provided by Jerry's Gaskets (a source you should get to know!). Or, as I and many have done, install the Accel injectors #150821 from Summit Racing* (Mine I installed myself in 2010?) and they are working just fine!)
*There is a plastic indexing nub on the Accel injectors that needs to be removed ONLY on those injectors going into the secondary ports. 5 minutes with a Dremel for all 8 was all it took and the connector will snap right on - no problem! |
Paul the posted Picture is Hans' Car
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Shelby Series 1 - Wilwood Brakes
Custom Interior
NCM Lifetime Member #978
|