ZR-1 Net Registry Forums - View Single Post

Z51JEFF · 08-05-2019

Before you put the plenum back on you do want to check the secondary’s and you might want to pressurize the fuel rails to make sure there are no leaks. ITS BEEN AWHILE SINCE IVE DONE THIS SO IF DOING THIS ISN'T AN TOOD IDEA,somebody please advice on this. I remember checking the system when I did my injectors years ago. I can’t remember how to energize the secondary system through the ignition key but that’s the best process,somebody here might know how to do that.

08-05-2019	#9
Z51JEFF Join Date: Dec 2007 Location: Fremont, CA Posts: 3,093	Re: Installing fuel injectors Before you put the plenum back on you do want to check the secondary’s and you might want to pressurize the fuel rails to make sure there are no leaks. ITS BEEN AWHILE SINCE IVE DONE THIS SO IF DOING THIS ISN'T AN TOOD IDEA,somebody please advice on this. I remember checking the system when I did my injectors years ago. I can’t remember how to energize the secondary system through the ignition key but that’s the best process,somebody here might know how to do that.