ZR-1 Net Registry Forums - View Single Post

Jax ZR1 · 07-25-2019

So again last night I started the car went for a drive no codes but I checked the memcal card and it was tight, it is one from Marc. But again no start when it was hot, found that there is only 5.5 volts going to the starter solenoid and if you give 12 off the battery it will start, not sure why I have such low voltage. Thinking that the 5.5 volts works when starter is cold but not enough when the starter gets warm

07-25-2019	#30
Jax ZR1 Join Date: May 2019 Location: Vanderhoof British Columbia Canada Posts: 34	Re: Code 42 EST So again last night I started the car went for a drive no codes but I checked the memcal card and it was tight, it is one from Marc. But again no start when it was hot, found that there is only 5.5 volts going to the starter solenoid and if you give 12 off the battery it will start, not sure why I have such low voltage. Thinking that the 5.5 volts works when starter is cold but not enough when the starter gets warm