Quote:
Originally Posted by secondchance
A small hard black hose was not attached to a softer rubber 90 elbow. Is that the MAP Sensor ?
Was this hose between the back of the plenum to underside of MAP sensor? MAP sensor is under an aluminum trim behind the plenum. Once reconnected, all should return to normal. If not, I suspect something else blew off under the plenum on top of MAP sensor hose when it backfired.
|
Yes it was . I am going to put a plastic ty on it to squeeze it tighter . Could not drive it today . Movie shoot on our street took up all our car moving spots and a bit of rain .
Started it and it sounded better but not a smooth as it used to be .
Thanks for the tips
Mike