Quote:
Originally Posted by Tripler
Morning. A small hard black hose was not attached to a softer rubber 90 elbow. Is that the MAP Sensor ? . I reconnected it but still runs a bit ruff . Do I need to take it for a drive to reset everything ? Should I be looking for anything else ?
Mike
|
A small hard black hose was not attached to a softer rubber 90 elbow. Is that the MAP Sensor ?
Was this hose between the back of the plenum to underside of MAP sensor? MAP sensor is under an aluminum trim behind the plenum. Once reconnected, all should return to normal. If not, I suspect something else blew off under the plenum on top of MAP sensor hose when it backfired.