ZR-1 Net Registry Forums - View Single Post - Aftermarket Belt Tensioner Pulley Failure

Locobob · 06-05-2019

I have a new Gates tensioner pulley and belt installed now. I went off Craigs info on the belt size but I found the Gates 815 belt to be a little loose... like I didn't even have to fight to get it on. So I went one size smaller and found the Gates 810 to be a better fit. This is with SRP underdrive pulleys btw, if you have stock pulleys disregard the belt info.

06-05-2019	#10
Locobob Join Date: Jan 2004 Location: Portland, OR Posts: 1,047	Re: Pulley Failure I have a new Gates tensioner pulley and belt installed now. I went off Craigs info on the belt size but I found the Gates 815 belt to be a little loose... like I didn't even have to fight to get it on. So I went one size smaller and found the Gates 810 to be a better fit. This is with SRP underdrive pulleys btw, if you have stock pulleys disregard the belt info. __________________ Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368