ZR-1 Net Registry Forums - View Single Post

secondchance · 05-31-2019

Based on my experience, when I installed a brand new set, it took a while for selective ride system to function properly and turn off the the warning linght. I think this was due to new shocks having a bit of resistance in turning the gear on top which loosened up after a while.
When gear is turning freely (as in used shock), as mentioned below, for fronts, I would check gear to planetary gear in actuator relationship. Look for crushed rubber bushing below the cup or cup being too loose.

05-31-2019	#7
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,723	Re: Service ride control light.. Based on my experience, when I installed a brand new set, it took a while for selective ride system to function properly and turn off the the warning linght. I think this was due to new shocks having a bit of resistance in turning the gear on top which loosened up after a while. When gear is turning freely (as in used shock), as mentioned below, for fronts, I would check gear to planetary gear in actuator relationship. Look for crushed rubber bushing below the cup or cup being too loose.