Quote:
Originally Posted by secondchance
Sorry. I missed your earlier post asking for a relay pic and location.
Perhaps I did not make it clear - relay leg can be bent sideways first followed by another bend "up" to clear the adjacent relay - double bend.
|
Yun,
Thanks for chiming in. I don’t recall u mentioning a “double bend” but I am glad u took the time to clarify it here. I mentioned my “solution” to Marc H at lunch last week, and he was suggesting the same approach. I also took down some of the outer perimeter to the relay so the now soldered wire would not be pinched when the relay is positioned back in the harness connector. The error in the FSM cost me $15 for a new relay.
Turning the headlamps on in the garage showed a crisp cutoff. Need to look at high beams also. I’ll try taking pics either in a dark garage or outside in the night.