Quote:
|
Originally Posted by 32valvZ
On a side note, I have noticed an assortment of different color tones on these engines. Some are a darker grey like mine, & some much lighter like yours and a few are in between the two.....should they all be the color you have?
|
The original finish can be a myriad of colors. From a nice shiney silver to a medium grey and then a navy green color. It depends on a lot of things, and care is one of them.
Pulling the parts off is not that difficult if you have patience and can follow instructions. I have done a couple of write ups on tearing the motor down and I have walked several people through it with phone support as well.
Don't hesitate to ask questions, and be sure to take advantage of my special.