ZR-1 Net Registry Forums - View Single Post

XfireZ51 · 06-24-2018

I have had battery disconnected while doing work on AC system. After finishing the work, I connected the (-) cable and started the motor. Usually, I will switch the gauges to Coolant Temps, however, what I got was only a switching back and forth to TRIP and ODO. Of course the Trip button is adjacent to gauges. I can play with the Gauges button and get gauge data. Sometimes it will stay, sometimes revert back to Trip/ODO data.
Anyone encounter a similar situation. Don't think its the cluster. Could be button cluster. If so, is it specific to ZR or generic C4?

06-24-2018	#1
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,685	92 Gauges intermittent display I have had battery disconnected while doing work on AC system. After finishing the work, I connected the (-) cable and started the motor. Usually, I will switch the gauges to Coolant Temps, however, what I got was only a switching back and forth to TRIP and ODO. Of course the Trip button is adjacent to gauges. I can play with the Gauges button and get gauge data. Sometimes it will stay, sometimes revert back to Trip/ODO data. Anyone encounter a similar situation. Don't think its the cluster. Could be button cluster. If so, is it specific to ZR or generic C4?