ZR-1 Net Registry Forums - View Single Post - High amp draw

BigIke · 05-17-2018

The Alternators are from Jerry, the only way to go IMHO. The Battery is New, but it's done it with two or three different batteries.

I'm putting it on the lift after work to install my Watson Headers and New ZF6.

When i get it running again, i'll write down my current draw for: Fan1, Fan2, AC Blower Motor, and Total Current load. It's got to be something easy.

It only shows low VDC when the coolant temp is high @ idle or when the AC is on @ idle.

05-17-2018	#4
BigIke Join Date: Aug 2014 Location: Montgomery TX Posts: 263	Re: High amp draw - diagnostic assistance The Alternators are from Jerry, the only way to go IMHO. The Battery is New, but it's done it with two or three different batteries. I'm putting it on the lift after work to install my Watson Headers and New ZF6. When i get it running again, i'll write down my current draw for: Fan1, Fan2, AC Blower Motor, and Total Current load. It's got to be something easy. It only shows low VDC when the coolant temp is high @ idle or when the AC is on @ idle.