[HAWAIIZR-1]

Originally Posted by XfireZ51

Craig,

My interest in better cooling was due to use of AC in hot weather traffic. Otherwise not much issue. Plus, w ~550chp, the motor is generating more heat than a stock motor. I would simply install a stock thermo w the Fluidyne. Should be fine.

Thanks for your input. I’ll do some touring this winter, but last summer I had high temps too. Never changed coolant yet in this 95 so time to service and figured the Fluidyne would give me the extra cooling I needed. I guess I can always drill the two 1/8” holes later if needed. My motor is stock other than I’ll install the ported top end and install the headers in next spring. Thanks again.