Quote:
Originally Posted by jrd1990zr1
Put the wiring back together, attached an actuator to the box went from full cold to hull heat and it set code 01. At full code the blend door closes over the heater core as it should. At full heat the door opens about 1/2 inch and slowly flutters. Tried two more actuators did the same with all. Went through the FSM procedure it appears the programer is the problem. Called Bryan Thompson he also believes this is a programer problem. So the plan is now to remove the programmer, control head and put them in a box with my actuators to Bryan.
I wish the blend door had been fluttering before I removed the heater box, might have saved some work.
|
I'd be interested in the part# on the label of the programmer when you remove it. I believe I've one stuffed away somewhere but it's difficult to put a 'hands-on' currently.