ZR-1 Net Registry Forums - View Single Post

WVZR-1 · 10-07-2017

The images in the manual seem to be "way wrong"! The information correct but images wrong.

JIM (QB93Z) should have this adapter - 02001575. Have him check that for you and maybe a 02001384 if he has that. Those numbers are in the manual but don't seem to transfer to the configuration images.

The adapter that I mentioned in post#2 seems to be the GM equivalent of the 02001575 so with the 02001384 adapter it would work for the Tech1a, I used the adapter with my Tech1 which is a bit different. My DLC cable is dedicated to the early 12 pin ALDL. The 02001575 should ave a toggle on one side of it if it's the same as the 3000053 I mentioned.

10-07-2017	#6
WVZR-1 Join Date: Oct 2004 Posts: 1,884	Re: Piecing Together a Tech 1 Scan Tool Kit The images in the manual seem to be "way wrong"! The information correct but images wrong. JIM (QB93Z) should have this adapter - 02001575. Have him check that for you and maybe a 02001384 if he has that. Those numbers are in the manual but don't seem to transfer to the configuration images. The adapter that I mentioned in post#2 seems to be the GM equivalent of the 02001575 so with the 02001384 adapter it would work for the Tech1a, I used the adapter with my Tech1 which is a bit different. My DLC cable is dedicated to the early 12 pin ALDL. The 02001575 should ave a toggle on one side of it if it's the same as the 3000053 I mentioned. Last edited by WVZR-1; 10-07-2017 at 04:08 PM.