Re: TB removal and then some!!!
Quote:
Originally Posted by Roadster
One of the highlights of the entire event was how the influence of one member's recommendation to buy a really cool product.....
A big thanks to Robert ( cvette98pacecar) for coming back to the tent and help me spend some $$..... 
these lug guide tool's for wheels are a easier way to take off and install your wheels on the vehicle, especially if you have aftermarket wheels and calipers. 3 needed per wheel, will be anxious to try them out....
Thank you Robert!!!
 |
In the C7 world, these are popular among those with Carbon-Ceramic brake rotors that come on the Z07 package or can be ordered separately now. Too often a tech removing or replacing wheels will slip and chip the edge of the rotor. Rotor is toast, cough up $2,000 or so. As a result, many are packing the lug nut guides in their cars for when they need to have a tire replaced or a wheel removed for any reason. --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
|