Quote:
Originally Posted by gtcollins@maxnet.co.nz
Hi Tom
When I painted the top of my engine I did it in bass coat clear coat so I paint the silver first then I tried to paint the black with a brush all it did was make gray so I then clear coated over the hole manifold once dry I sanded the whole lot down with 400 sand paper then I masking taped the area of and painted it when dry I sanded the excess paint of then clear coated over the hole manifold once again here is a photos of the job hopefully this makes sense
Regards Glen
Looking good Glen, thanks for the idea....
Sent from my SM-G930F using ZR-1 Net Registry mobile app |
Looking good Glen, thanks for the idea....
Quote:
Originally Posted by mgbrv8
Tom I may have miss this in previous comments but what is this anomaly on the surface?
Dave
|
Dave, I have no clue, as that is Glen's plenum. I also did not take notice until you just pointed that out. Hopefully he will see the post and respond. I would imagine that would need a repair. It's weird as it appears in one pic and not the other. So maybe it was repaired before he put the final finish on the plenum...