ZR-1 Net Registry Forums - View Single Post

Billy Mild · 01-23-2017

I unplugged the TPS connector and checked voltages with a volt meter. PIN A and B hooked up showed 0 Volts. PIN A and C showed 4.99 volts.

I hooked up my scanner today and it seems to be reading okay with the engine off and cold. I was 0.52 volts on my scanner, and when at WOT it reads 4.72 volts.

01-23-2017	#5
Billy Mild Join Date: Aug 2014 Location: Kansas City, MO Posts: 835	Re: TPS sensor went out I unplugged the TPS connector and checked voltages with a volt meter. PIN A and B hooked up showed 0 Volts. PIN A and C showed 4.99 volts. I hooked up my scanner today and it seems to be reading okay with the engine off and cold. I was 0.52 volts on my scanner, and when at WOT it reads 4.72 volts.