ZR-1 Net Registry Forums - View Single Post

billschroeder5842 · 11-19-2016

Ok, I THINK I found it...

I started to take everything apart (again) and tapping here and there with my calloused finger. I noticed that tapping on the instrument cluster seemed to make the squeak more pronounced.

I dropped the carpeted panel under the steering column and immediately noticed that the metal fan shroud for the courtesy light along with the glass lens were loose and could easily vibrate from a rough road or a bit of exhaust drone.

I did some gluing and taping and took it out.

So far so good! Fingers crossed!

11-19-2016	#5
billschroeder5842 Join Date: Nov 2016 Location: Southlake, TX Posts: 599	Re: Chinese Squeak torture Ok, I THINK I found it... I started to take everything apart (again) and tapping here and there with my calloused finger. I noticed that tapping on the instrument cluster seemed to make the squeak more pronounced. I dropped the carpeted panel under the steering column and immediately noticed that the metal fan shroud for the courtesy light along with the glass lens were loose and could easily vibrate from a rough road or a bit of exhaust drone. I did some gluing and taping and took it out. So far so good! Fingers crossed! __________________ Bill Schroeder Texas Proud! 1991 Corvette ZR1 #1388 2015 Challenger Scat Pack Shaker [SIGPIC][/SIGPIC]