ZR-1 Net Registry Forums - View Single Post

WARP TEN · 10-18-2016

There is a clip in the front that I recall snaps onto the round bar. Pushing down and back very hard at the center front of the cushion should allow you to remove the lower cushion. Sorry no pics. When I replaced the diaphragms on my 93 many years ago, I used pieces cut out from a rubber dish washing glove. As far as I know they are still working. I don't think you can repair them this way on the 94-95 pump. Search the forum--should be quite a few posts on this.--Bob

10-18-2016	#3
WARP TEN Join Date: Apr 2007 Location: Lake Bluff, IL Posts: 2,151	Re: How to remove seat cushion? There is a clip in the front that I recall snaps onto the round bar. Pushing down and back very hard at the center front of the cushion should allow you to remove the lower cushion. Sorry no pics. When I replaced the diaphragms on my 93 many years ago, I used pieces cut out from a rubber dish washing glove. As far as I know they are still working. I don't think you can repair them this way on the 94-95 pump. Search the forum--should be quite a few posts on this.--Bob __________________ 2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" Last edited by WARP TEN; 10-19-2016 at 10:39 AM.