ZR-1 Net Registry Forums - View Single Post

XfireZ51 · 08-04-2016

Cliff,

The issue causing my fuse to blow was due to the fact that the LSx coils require 20amps for charging. I was ignorant of that fact when I put things together. The motor ran for 30-45sec. (Idle was really smooth I might add, even at first start),
but then it started to stumble and it finally died. I traced the shutdown to the Inj.1 fuse. Once I put things back to stock, motor ran fine.
So my suspicion for u is that as the coils warm up, the current draw is blowing the fuse. That's why I posted what I did.

08-04-2016	#9
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,686	Re: INJ1 Fuse Blowing Cliff, The issue causing my fuse to blow was due to the fact that the LSx coils require 20amps for charging. I was ignorant of that fact when I put things together. The motor ran for 30-45sec. (Idle was really smooth I might add, even at first start), but then it started to stumble and it finally died. I traced the shutdown to the Inj.1 fuse. Once I put things back to stock, motor ran fine. So my suspicion for u is that as the coils warm up, the current draw is blowing the fuse. That's why I posted what I did.