ZR-1 Net Registry Forums - View Single Post

A26B · 09-26-2007

Yep! Don't let them do the work. How could they know if you need a new flywheel without inspecting it? Whether you want a stock type or various levels of high performance, there are lots of choices for clutches. Should you need a flywheel, good used dual mass (stock) flywheels are available and a Fidanza flywheel can be had new for about $400 or less.

Aaron Scott (SGC) in Thomasville, GA would be a great place to take it to. He can give you all the options & recommendations. His reputation is impeccable.

09-26-2007	#2
A26B Join Date: Dec 2003 Location: Arcadia, OK Posts: 3,404	Re: My clutch is shot. Yep! Don't let them do the work. How could they know if you need a new flywheel without inspecting it? Whether you want a stock type or various levels of high performance, there are lots of choices for clutches. Should you need a flywheel, good used dual mass (stock) flywheels are available and a Fidanza flywheel can be had new for about $400 or less. Aaron Scott (SGC) in Thomasville, GA would be a great place to take it to. He can give you all the options & recommendations. His reputation is impeccable. __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. Last edited by A26B; 09-26-2007 at 09:24 PM.*