ZR-1 Net Registry Forums - View Single Post

Scrrem · 03-28-2016

I have never heard anyone who has had good luck with those boxes. Changing the gears is not too bad, you will need to removed the exhaust, drive shaft and the speed sensor, remove a retainer and slip the gear off the tail shaft. Some folks can remove their drive shaft without disconnecting the C-beam, I wasn't so lucky. Marc H. sells the gears you need.
Rich

03-28-2016	#2
Scrrem Join Date: Feb 2009 Location: Alexandria, Virginia Posts: 1,454	Re: Speedo Gears replacement I have never heard anyone who has had good luck with those boxes. Changing the gears is not too bad, you will need to removed the exhaust, drive shaft and the speed sensor, remove a retainer and slip the gear off the tail shaft. Some folks can remove their drive shaft without disconnecting the C-beam, I wasn't so lucky. Marc H. sells the gears you need. Rich __________________ 1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member