ZR-1 Net Registry Forums - View Single Post

Demps · 03-21-2016

Sometimes the oil pump side causes the threaded fitting to back out of the pump. May have to put a wrench on the nut coupling and tap wrench with a hammer to break nut loose.
Ted

This isn't clear until you do it...sorry.

03-21-2016	#5
Demps Join Date: Jan 2006 Location: Niceville Posts: 999	Re: Oil Cooler Line replacement Sometimes the oil pump side causes the threaded fitting to back out of the pump. May have to put a wrench on the nut coupling and tap wrench with a hammer to break nut loose. Ted This isn't clear until you do it...sorry.