ZR-1 Net Registry Forums - View Single Post

WVZR-1 · 10-22-2015

It would seem "odd" that the Gates product weren't correct because the part fits all '90+ C4 Corvettes BUT stranger things of course could happen. The Continental could be more easily found OR NAPA. It was quite early when I saw your post but I'd say a NAPA 11743 is correct. NAPA image doesn't seem to display the larger ID BUT in the NAPA spec for the product they mention the diameter IDs by dimension.

.72 for smaller ID and .92 for the larger ID on the short leg.

*** I did find a Gates "identifier" and the Gates is also spec'd at .72/.92 and I expect that Gates is actually the NAPA provider. That would explain the similarity of the images.

You "my friend" should have no trouble.

10-22-2015	#30
WVZR-1 Join Date: Oct 2004 Posts: 1,884	Re: Likely Heater Core Failure It would seem "odd" that the Gates product weren't correct because the part fits all '90+ C4 Corvettes BUT stranger things of course could happen. The Continental could be more easily found OR NAPA. It was quite early when I saw your post but I'd say a NAPA 11743 is correct. NAPA image doesn't seem to display the larger ID BUT in the NAPA spec for the product they mention the diameter IDs by dimension. .72 for smaller ID and .92 for the larger ID on the short leg. *** I did find a Gates "identifier" and the Gates is also spec'd at .72/.92 and I expect that Gates is actually the NAPA provider. That would explain the similarity of the images. You "my friend" should have no trouble. Last edited by WVZR-1; 10-22-2015 at 07:24 AM.