ZR-1 Net Registry Forums - View Single Post

RussMcB · 08-22-2015

John, I don't know for sure, but here are my thoughts.

The FX3 system is dynamic, and adjusts itself based on a few variables. So, it might, or might not, be where you want it when the car is stopped, not moving.

Perhaps a better method (although a pain) would be to remove the electronic top off the shock, turn the adjustment all the way to one end, and hope that is the setting you want (full soft or full hard). If it isn't, try the other direction.

Good luck.

08-22-2015	#2
RussMcB Join Date: Jan 2015 Location: Marietta, GA USA Posts: 1,148	Re: FX3 SRC John, I don't know for sure, but here are my thoughts. The FX3 system is dynamic, and adjusts itself based on a few variables. So, it might, or might not, be where you want it when the car is stopped, not moving. Perhaps a better method (although a pain) would be to remove the electronic top off the shock, turn the adjustment all the way to one end, and hope that is the setting you want (full soft or full hard). If it isn't, try the other direction. Good luck.