ZR-1 Net Registry Forums - View Single Post

Mystic ZR-1 · 08-18-2015

Not if you disconnect the flex hose and bleed normally after you reconnect the hose.
True, the vent screw is on the top, but if you flush enough, you'll know
if there's restriction in the caliper.
Here's the best advice:
Worse comes to worse... maybe follow the instructions in the FSM?

08-18-2015	#13
Mystic ZR-1 Join Date: Jan 2010 Location: Mystic CT Posts: 2,628	Re: Trouble bleeding rear brakes Not if you disconnect the flex hose and bleed normally after you reconnect the hose. True, the vent screw is on the top, but if you flush enough, you'll know if there's restriction in the caliper. Here's the best advice: Worse comes to worse... maybe follow the instructions in the FSM?