ZR-1 Net Registry Forums - View Single Post

mike100 · 06-13-2015

additionally the pop is coming from dry axle stub splines. grease the splines and retorque the axle nut- no need to pull the half shaft. just remove axle nut and work grease in with a small brush on both sides- then thrust the axle back and forth until it is well greased. retighten nut to spec. I have never had to get a new teflon coated washer, but it is recommended.

06-13-2015	#3
mike100 Join Date: Feb 2011 Location: San Marcos CA Posts: 1,786	Re: Clicking from rear under initial load... additionally the pop is coming from dry axle stub splines. grease the splines and retorque the axle nut- no need to pull the half shaft. just remove axle nut and work grease in with a small brush on both sides- then thrust the axle back and forth until it is well greased. retighten nut to spec. I have never had to get a new teflon coated washer, but it is recommended.