ZR-1 Net Registry Forums - View Single Post

SteveCanyon · 05-03-2015

Ok, Paul W. sent me a PM with some info. I had not tried clearing out the codes, so disconnected the battery for about half an hour. Just drove the car, still no full power with the switch. However, when I manually hold it against the stops and the light illuminates, I am getting full power when I punch it. Drove it for a while and came home, checked the codes and none appeared except the code 12. So, going to hold off on the fuel system for now. So, in the end it was the switch. I am getting a Hailbeck chip so may just have him fix it in there instead of pulling the switch out for now.

05-03-2015	#16
SteveCanyon Join Date: Apr 2015 Location: Northwest AR Posts: 94	Re: Full engine Power light Ok, Paul W. sent me a PM with some info. I had not tried clearing out the codes, so disconnected the battery for about half an hour. Just drove the car, still no full power with the switch. However, when I manually hold it against the stops and the light illuminates, I am getting full power when I punch it. Drove it for a while and came home, checked the codes and none appeared except the code 12. So, going to hold off on the fuel system for now. So, in the end it was the switch. I am getting a Hailbeck chip so may just have him fix it in there instead of pulling the switch out for now.