Quote:
Originally Posted by RICHARD TILL
I`ll never pull it again without cleaning the contacts inside the starter solenoid.
|
Great suggestion
Starter Rebuild
......and I might add........Never pull the Plenum without blocking TB Coolant at the Injector Housing
To accomplish that without removing the Injector Housings would require the removal of the Injector Housing Coolant Manifolds (use heat on those stubborn Coolant Manifold Bolts heating the Coolant Manifolds/Injector Housing in the area of each bolt). The Coolant Manifolds are removed to make sure you keep out aluminum shavings that may drop into each Injector Housing Coolant Port during installing of the TB Coolant Port threaded 1/8 inch pipe plug.
Injector Housing TB Coolant Blocking