ZR-1 Net Registry Forums - View Single Post

Roadster · 03-30-2015

My 94 will be 1 year for me April 6th, where has the time gone???
When first purchased I noticed that there were only two nuts attached to the ECM. And of course one disappeared.....so another member mentioned the size that they may be and I just couldn't find them any where, even checked ebay. I ended up with a smaller nut, but the correct fitment, so I went with them.....
Well today made another trip to Fastenal to see what they might have in stock. They came through with replacement u joint bolts for my 82, as I am replacing both TA's and stripped two of the bolts....

So after a few minutes they found the exact size for our ECM's, but a different color, oh well!!!
Here are a few pics, that show the original, the replacement and the smaller replacement that I was using.

Part#0162816 they are M5's.....cost $.22 a piece almost had to buy the whole box, but let me purchase just 8.....

And you can also use a 10mm combo wrench to attach just like the originals.
I figured with the correct nuts on there now I should pick up an extra 3HP.

03-30-2015	#1
Roadster Join Date: Mar 2014 Location: Warrington PA Posts: 1,914	My ECM has new "nuts"..... My 94 will be 1 year for me April 6th, where has the time gone??? When first purchased I noticed that there were only two nuts attached to the ECM. And of course one disappeared.....so another member mentioned the size that they may be and I just couldn't find them any where, even checked ebay. I ended up with a smaller nut, but the correct fitment, so I went with them..... Well today made another trip to Fastenal to see what they might have in stock. They came through with replacement u joint bolts for my 82, as I am replacing both TA's and stripped two of the bolts.... So after a few minutes they found the exact size for our ECM's, but a different color, oh well!!! Here are a few pics, that show the original, the replacement and the smaller replacement that I was using. Part#0162816 they are M5's.....cost $.22 a piece almost had to buy the whole box, but let me purchase just 8..... And you can also use a 10mm combo wrench to attach just like the originals. I figured with the correct nuts on there now I should pick up an extra 3HP. __________________ Tom 1994 ZR-1 #009 "captured test fleet car" 1974 LS4 454 Vert 1974 L-82 355 Vert. 1982 L83 CFI...now a retired "dd"....Sold WAZOO Member Last edited by Roadster; 03-30-2015 at 03:03 PM.