Quote:
Originally Posted by MuRCieLaGo
What can I do to test it properly? It's pretty sad he lost the power key !!!
|
With the key on, ground the pink wire in the green connector (third from drivers side) on ECM. Use a small finishing nail stuck in alongside the wire connector with an alligator clip pigtail attached to the end for grounding. This will allow you to activate and observe the Secondaries function with Plenum installed.
See Secondary Functional Test and Reconditioning the Secondary Actuators
With Key On........
Find the Pink Wire which is C17 (or pink wire with black strip) on the ECM. Insert a Paperclip along side the Pink wire
and attach a ground wire with Alligator Clip on both ends. Pin C17 is located in the Green Connector
second connector on the ECM from the passenger side.
Look down on the Passenger Side in the ...........................Look down on the Drivers Side in the
direction of the screw driver (Use a Flashlight). ..............direction of the screw driver (Use a Flashlight).
You will see the shaft of the canister which will ...............You will see the shaft of the canister which will
move toward the FRONT of the engine when ...................move toward the REAR of the engine when
you ground the Alligator Clip (The Front of the ................you ground the Alligator Clip (The Rear of the
engine is to the Right in the Photo)..................................(engine is to the Right in the Photo).
