ZR-1 Net Registry Forums - View Single Post - '91, Cranks but No Start (and radiator fan runs?!)

RussMcB · 02-23-2015

Problem solved!

Big thanks to Marc (and Mike) for pointing me in the right direction. Apparently, my chip was not fully seated. I removed it, reinserted being careful everything was square, and the car started right up.

I also discovered my fuel pressure tester (or hose, fittings) must be broken because it continued to read zero pressure with the engine running.

Now I'm wondering if there is anything I can or should do to prevent it from coming loose again. The little blue and white clips were snapped in place correctly (I think).

Thanks, ZR-1.net !

02-23-2015	#8
RussMcB Join Date: Jan 2015 Location: Marietta, GA USA Posts: 1,148	Re: '91, Cranks but No Start (and radiator fan runs?!) Problem solved! Big thanks to Marc (and Mike) for pointing me in the right direction. Apparently, my chip was not fully seated. I removed it, reinserted being careful everything was square, and the car started right up. I also discovered my fuel pressure tester (or hose, fittings) must be broken because it continued to read zero pressure with the engine running. Now I'm wondering if there is anything I can or should do to prevent it from coming loose again. The little blue and white clips were snapped in place correctly (I think). Thanks, ZR-1.net !