ZR-1 Net Registry Forums - View Single Post

HIZNHRZ · 02-16-2015

These are C6 ZR1 wheels with C6 Z06 diameter, width, and tire sizes. The offset is as close to a C4 ZR-1 wheel as I could find.

The wheels are 18 X 9.5 inch (fronts) with a +57mm offset and rear wheels are 19 X 12 inch with a +59mm offset.

I used a spacer on the rear wheels. The outside edge of the wheels and tires are located and look the same (as the OE wheels and tires) in terms of their location to outboard side the wheel housing. Sourced a 10mm spacer for the rear wheels. The rear tires are also 1" larger (than OE) in diameter. The front and rear suspension was lowered 1/2". The speedometer was corrected +4%.

--------------------------------------------------------------------------------

02-16-2015	#2
HIZNHRZ Join Date: Apr 2004 Location: Germantown, MD Posts: 732	Re: Z06 Wheels fit? These are C6 ZR1 wheels with C6 Z06 diameter, width, and tire sizes. The offset is as close to a C4 ZR-1 wheel as I could find. The wheels are 18 X 9.5 inch (fronts) with a +57mm offset and rear wheels are 19 X 12 inch with a +59mm offset. I used a spacer on the rear wheels. The outside edge of the wheels and tires are located and look the same (as the OE wheels and tires) in terms of their location to outboard side the wheel housing. Sourced a 10mm spacer for the rear wheels. The rear tires are also 1" larger (than OE) in diameter. The front and rear suspension was lowered 1/2". The speedometer was corrected +4%. -------------------------------------------------------------------------------- Last edited by HIZNHRZ; 02-16-2015 at 05:08 PM.