View Single Post
Old 02-15-2015   #4
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,816
Default Re: Control Data Module (CDM) Failure

I am guessing ........ that sounds like a wiring/plug issue. See if you have 12v at the orange wire (black wire grounded) to the speakers (just disconnect speaker plug and test the plug input (female side) with radio/CD on (switch on)).

If you have 12v on the Orange Input wire, switch in a known good speaker amp/plug. You obviously have 12v on the other three speakers.

Last edited by Dynomite; 02-15-2015 at 12:26 PM.
Dynomite is offline   Reply With Quote