ZR-1 Net Registry Forums - View Single Post

XfireZ51 · 01-19-2015

I usually start the motor if its cold and warm up the oil but not hot. Then I'll use a floor jack to raise the passenger side of the car slightly. Remove the oil filler cap and undo the drain bolt. Let it sit overnight. I will also pour about
3/4L of oil into new filter before installing.

01-19-2015	#3
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,686	Re: Changing oil...Let it drain overnight ? I usually start the motor if its cold and warm up the oil but not hot. Then I'll use a floor jack to raise the passenger side of the car slightly. Remove the oil filler cap and undo the drain bolt. Let it sit overnight. I will also pour about 3/4L of oil into new filter before installing.